Short answer: PVC (polyvinyl chloride) is a plastic made from two raw materials: salt and ethylene, which comes from oil or gas. About 57% of its weight comes from the chlorine in salt. Vinyl records are pressed from a PVC compound because it flows into tiny grooves when hot, holds them exactly when cold, and lasts for decades.

What is PVC?

PVC stands for polyvinyl chloride. It is one of the most used plastics in the world. You find it in pipes, window frames, cables, flooring and medical tubing. And in records, which is why we call them "vinyl".

There are two main types:

  • Rigid PVC: hard and stiff. Pipes, window frames, records.
  • Flexible PVC: soft, with added plasticisers. Cables, flooring, some fabrics.

Records use a rigid PVC compound.

How is PVC made?

In four steps.

  1. Salt becomes chlorine. Salt water (brine) is split with electricity. This is called electrolysis. It produces chlorine and caustic soda.
  2. Chlorine meets ethylene. Ethylene is made from oil or natural gas. Chlorine and ethylene react to form ethylene dichloride (EDC).
  3. EDC becomes vinyl chloride. EDC is heated under pressure and turns into vinyl chloride monomer (VCM), a gas.
  4. VCM becomes PVC. The small VCM molecules are linked into long chains. This is polymerisation. The result is a white PVC powder.

That powder is then mixed with additives to make a compound, ready for use.

Because more than half of PVC comes from salt, it uses less oil than most plastics. That is one reason for its relatively low price.

What is a vinyl record made of?

A vinyl record is not pure PVC. It is a compound made for pressing. Typically:

  • PVC resin, often a copolymer with a little vinyl acetate. This helps it flow at lower temperatures and fill the groove.
  • Heat stabilisers. PVC breaks down when heated. Stabilisers protect it in the press.
  • Lubricants, so it releases cleanly from the stampers.
  • Pigment: carbon black for black records, or colourants for coloured vinyl.

The amount of pigment is tiny. That is why coloured vinyl has almost the same carbon footprint as black.

Why are records made of PVC?

Because nothing else does the job as well, yet.

  • It copies detail. Hot PVC flows into grooves thinner than a human hair and keeps every detail when it cools.
  • It is tough. With care, a record survives hundreds of plays.
  • It lasts. Stored well, a record lasts for decades. Many from the 1960s still play today.
  • It is quiet. A good PVC pressing has low surface noise.

Before PVC, records were made of shellac. Shellac was brittle, noisy and broke if you dropped it. PVC replaced it from the late 1940s.

Is PVC dangerous?

The finished record is stable and safe to handle. The concerns are in production and disposal.

  • Vinyl chloride monomer (the gas in step 3) is classified as a human carcinogen. In Europe, plants work in closed systems under strict rules.
  • Old additives. Some older PVC products used lead or cadmium stabilisers. Europe phased these out, and the EU has restricted lead in PVC by law since 2023. Modern record compounds use other stabilisers.
  • Burning PVC can release harmful gases, including hydrogen chloride and dioxins, if not done in proper facilities.

It is fair to say PVC is not a "clean" material. It is also fair to say a record is used for decades, which is not true for most plastic products.

Can PVC records be recycled?

Partly.

  • In the factory, yes. The trimmed edges from black records (the "flash") are ground up and pressed again. This is called regrind.
  • After use, rarely. Old records cannot yet be turned back into record compound. Some go into other PVC products like pipes. The best "recycling" for a record is still a second-hand shop.

Are there alternatives to PVC for records?

A few, all still early.

  • Bio-attributed PVC. Same PVC, but part of the oil-based ingredient is replaced with bio-based feedstock (like used cooking oil), counted by a certified "mass balance" method. The 2024 industry carbon report found one such compound could cut a record's footprint by around 44%. It costs more and not every plant offers it yet.
  • Recycled PVC compounds. Some plants press with recycled material. Sound quality can vary.
  • Other plastics (PET and bio-plastics). Tested by a few plants. Promising, but not yet an industry standard.

We are happy to talk about material options for your project.

FAQ

What does PVC stand for?

Polyvinyl chloride.

What is PVC made from?

Salt (for chlorine) and ethylene (from oil or gas). About 57% of PVC's weight is chlorine.

Why are records called "vinyl"?

Because they are made of polyvinyl chloride, a vinyl plastic.

Is coloured vinyl made of a different material?

No. It is the same PVC compound with a different pigment.

Is a vinyl record toxic to touch?

No. A finished record is stable and safe to handle.


Next: Is vinyl sustainable? An honest answer, or see how a vinyl record is made from start to finish. Ready to press? Use our configurator.

Sources: ECVM (European Council of Vinyl Manufacturers), "How is PVC produced?"; VRMA / Vinyl Alliance, "Vinyl Record Industry: First Carbon Footprinting Report", June 2024; Commission Regulation (EU) 2023/923 on lead in PVC.