Skip to content
Packaging

Packaging, made clear

Three covers, a few things inside, one finish. Everything that's possible, on one page.

Vinyl records in their sleeves

Pick a cover

  • Discobag

    Thin card with no spine and no inner sleeve. The label shows through the hole.

    Holds
    1 record
    Inner sleeve
    None
    Spine
    0 mm
    Centre hole
    Built in
  • Sleeve

    The classic. Closed on three sides, the record slides in through the fourth.

    Holds
    1 or 2 records
    Inner sleeve
    Yes
    Spine
    3 to 5 mm
    Centre hole
    Front, or both sides
  • Gatefold

    Opens like a book, with a pocket on each side. Always printed.

    Holds
    1 or 2 records
    Inner sleeve
    Yes
    Spine
    6 or 7 mm
    Centre hole
    No

Not printing? Sleeves and discobags also come in plain white, black or kraft board.

Spine width

The spine is the edge you read on a shelf. Its width depends on what goes inside.

Usual widths: the exact one depends on the printer. See the die-lines

  1. 010 mmDiscobagOne record, no inner sleeve
  2. 023 mmSleeveOne record in an inner sleeve, insert optional
  3. 034 mmSleeveOne record in an inner sleeve, plus a booklet
  4. 045 mmSleeveTwo records in inner sleeves, insert optional
  5. 056 or 7 mmGatefoldOne or two records in inner sleeves, insert and/or booklet optional

What goes inside

  • Inner sleeve

    Holds the record and keeps dust off. A discobag has none: the record goes straight in.

    White paperBlack paperPrintedPoly-lined
  • Insert

    A printed sheet, or one that folds out like a small poster.

    Fits a 3 mm sleeve
  • Booklet

    8 to 20 stapled pages in full colour.

    Best in a 4 or 5 mm sleeve

Inner and protective sleeves

A record is packed in layers, from the inside out. Each one protects something different.

Then store records upright, away from heat and damp. Don't pack a tight protective sleeve too full.

  1. 01 · Inside the cover

    Inner sleeve

    Holds the record itself. Poly-lined is the smoothest.

    Protects against

    • Dust in the grooves
    • Static
    • Scuffs
  2. 02 · Sleeve or gatefold

    Cover

    Holds the record in its inner sleeve and carries your artwork.

  3. 03 · Over the cover

    Protective sleeve

    A clear plastic sleeve that slips over the cover. If you want your records to last and stay like new on the shelf, it is the simplest way to keep them safe. Available as an extra.

    Protects against

    • Ring wear
    • Dented corners
    • Shelf wear

Finishes

The coat on the board. It changes how the cover looks and feels.

Printed covers and printed inner sleeves take a varnish, and so do plain white or black covers. Kraft is left as it is.

  • Gloss

    A clear, shiny coat. Colours look deeper, and light glints off the board.

    Good forBold colour, photos and dark artwork.

  • Matte

    Soft and calm, with no shine. Smooth to the touch.

    Good forCalm designs, typography, a soft modern feel.

  • Inside out

    The board turned around, so its raw, uncoated side faces out. Natural and textured.

    Good forA raw, handmade or vintage look.

On request

Want more? We'll quote it

These aren't in the configurator. Tell us what you have in mind and we'll put it in your quote.

  • Embossing

    Part of the design pressed up from behind, so it rises out of the board. You feel it before you see it.

  • Debossing

    The opposite: pressed into the board, so the shape sinks in.

  • Spot UV

    A high-gloss varnish on chosen parts only, like a title or a shape, so they shine against the rest.

  • Die-cut

    A shape cut out of the cover, like a window or a hole, so the inner sleeve or the label shows through.

Artwork tips

  • A varnish can crack where the board folds, so keep important detail away from the spine and the folds.
  • Embossing, debossing and spot UV need bolder lines than print.
  • Print can shift a little. Run your artwork into the bleed shown on the template, and avoid thin borders close to the edge.

The details

Centre hole

A round hole so the label shows. For sleeves only.

  • On the frontPossible
  • On both sidesPossible
  • Back onlyNot possible

Extras

Small things that finish a record, or get it ready for a shop.

PosterStickerHand numberingShrink wrapProtective sleeveBarcodeDownload codeObi strip

Possible, or not?

  • Can two records go in a normal-looking sleeve?

    Yes. A 5 mm sleeve holds two.

  • Can a booklet go in a 3 mm sleeve?

    We recommend 4 or 5 mm, depending on what else is inside.

  • Can one record go in a gatefold?

    Yes. You choose the pocket, left or right.

  • Can two records go in a discobag?

    No. A discobag holds one record.

  • Can I have a hole in the back only?

    No. One hole goes in the front, or there's one on each side.

  • Can I get a plain, unprinted gatefold?

    No. Gatefolds are always printed.

  • Can I have embossing, debossing or spot UV?

    Yes, on request. We'll quote it.

  • Can a picture disc go in a printed sleeve?

    No. A picture disc comes in a clear PVC sleeve.

Not sure? We'll help you choose

Tell us about your record. We'll say honestly what works, and why.

Photos: cottonbro studio (Pexels), Simon Gough (Pexels)

Free quote

Which quote would you like?

Choose a format. We reply with a written quote, free and without obligation, usually within a couple of working days.