Resources
Free tools for artists, labels and anyone releasing a record.
Free tools
Colouring book
Free download16 pages
Sixteen pages for little ones (and their parents) on how a record is made: the studio, the cutting lathe, the press and the packaging, with Spinny the record, a maze, a spot the difference and a label to design yourself.
16 pages, A4, in English. Print at home, as many copies as you like.
Test pressing check
Compare the recording of your test pressing with the master. The check lines the two up and shows where to listen: clicks and pops, skips, speed, level, balance and surface noise.
Reading a test pressing
Test pressings are the first records pressed from your stampers, usually a handful of copies, made before the run. They are your one chance to hear the record as it will exist, and to catch a problem from cutting, plating or pressing while it can still be fixed.
What you may hear
- Tick
- A single short, sharp sound, mostly in the mid and high frequencies.
- Pop
- A single sharp sound across the whole range, louder and fuller than a tick.
- Crackle
- A run of small, sharp noises, like frying. Usually heard in quiet passages.
- Static
- A soft hiss with no sharp edge, like white noise under the music.
- Distortion
- The sound breaks up and loses clarity, often towards the end of a side, where the groove is tighter.
- Sibilance
- Harsh, splashy S sounds in vocals, or cymbals that fizz.
- Pre-echo
- A faint ghost of a loud sound, heard just before it arrives.
How to judge it
- 01
Listen to every copy
A problem can be on one copy and not on the others. Check each test pressing you received, not just one, and note which copy you heard it on.
- 02
The test is not the final run
Test pressings are made in a short run, before the press has settled at its working heat and cooling. A flaw can show on a test pressing and not on the finished records, and the other way round. Tell us what you hear: we check it with the plant before you approve.
- 03
Same place on every copy, or not?
A sound at the same moment on every copy is in the cut or the stampers, and needs fixing before the run. One that moves or appears on a single copy is usually a one-off from pressing.
- 04
Listen closely at the start and end
The first and last 30 seconds of each side, and the last track, where the groove is tightest and distortion shows first.
- 05
Write it down
For each issue, note the side, the minute and second, the copy, and what you hear. Listen twice, so you know it is on the record and not in your system.
- 06
Look at them too
In good light, check the records are flat, with no scuffs, marks or an off-centre hole.
Your turntable matters
A recording can only be as good as the system that plays it. An old or badly set-up turntable adds its own noise, distortion and speed errors, and can make a good pressing sound faulty. Before you record, check:
- The stylus is clean and not worn.
- The cartridge is aligned.
- Tracking force and anti-skate are set as the cartridge maker recommends.
- The platter turns at the right speed and the turntable is level.
Using the check above
Record each side of each copy as one WAV or AIFF file (24-bit, no noise reduction or other processing), from just before the first groove to the run-out, and add them as V1, V2, V3… The table then shows whether an issue is on every copy or only one.