Short answer: in January 2026 the Vinyl Alliance and the Music Climate Pact published the first product-level carbon footprints of vinyl records measured across the industry. Pressing a record emits less than was previously thought, and 40 to 60% less is within reach, mainly through cleaner energy and recycled or bio-attributed material. Most of those savings cost money, so they depend on labels and plants sharing the investment.
What is the report?
The Sustainable Supplier Program: Phase 1 Insights Report came out on 28 January 2026. Two organisations are behind it:
- the Vinyl Alliance, a global group of labels, pressing plants, distributors and turntable makers working to keep vinyl healthy;
- the Music Climate Pact, the music industry's shared climate commitment, whose members include the major labels.
They launched the programme together in 2025 and asked the carbon consultancy ClimatePartner to do the measuring. It is free to download from the Vinyl Alliance.
Sustainable Supplier Program: Phase 1 Insights Report
Download the reportHow did they measure it?
ClimatePartner calculated and checked 13 product carbon footprints from 9 manufacturers, which together make a large share of the world's records. Each footprint follows the Greenhouse Gas Protocol, the standard most companies already report against.
For the first time, the study covers both ways records are made:
- traditional pressing, where a puck of hot PVC is squeezed between two stampers with steam heat;
- injection moulding, where molten material is injected into a closed mould.
Measuring the product, not the whole company, matters. It gives a label a real number for its own records, which it needs for its climate reporting.
What did they find?
Three things stand out.
- Records emit less than people assumed. The Music Climate Pact sums it up plainly: record manufacturing creates significantly fewer emissions than previously thought. That does not make it free of impact.
- A 40–60% cut is possible per record. The range depends on the plant and on how far it goes.
- The same few changes do most of the work:
- moving away from fossil fuels, above all the natural gas that makes steam for traditional presses;
- switching to 100% renewable electricity;
- using bio-attributed material, where part of the fossil feedstock is replaced by renewable feedstock on paper, through a certified mass-balance system;
- putting more recycled material into the mix.
The report is honest about the catch: most of these improvements need investment. It argues the cost should be shared along the chain, not left to the plants alone.
What changed since the first report?
This is the Vinyl Alliance's second look at carbon. In 2024 it published a first industry carbon report with the Vinyl Record Manufacturers Association. In May 2025 it added a note: the method has been updated to the Greenhouse Gas Protocol product standard, and the first report overstated how much bio-attributed PVC saves.
That correction is a good sign. It is also a reason to be careful with green claims about any single material.
What does it mean for your release?
You do not need to wait for the industry. You can use the same levers when you order:
- Press on 140g. It uses less PVC than 180g and does not sound worse. See 140g vs 180g vinyl.
- Press close to where your fans are, and ship by road or sea, never by air.
- Ask how the plant is powered: renewable electricity, and how the steam is made.
- Ask about recycled or bio-attributed material, and what proof comes with it.
- Order the right quantity. Unsold records are the biggest waste of all.
If your release is part of a campaign, keep claims specific and backed by the plant's data. Our article Is vinyl sustainable? explains what you can and cannot say under EU rules.
What comes next?
The programme continues with technical workshops for plants and labels, practical guidance on greener manufacturing, and a wider look at impacts beyond carbon, over the whole life of a record.
FAQ
What is the Vinyl Alliance?
A global group of record labels, pressing plants, distributors, retailers and equipment makers that works to keep vinyl thriving, including on sustainability.
What is a product carbon footprint?
The greenhouse gases linked to one product, here one record, from its materials to the moment it leaves the plant. It is expressed in kilograms of CO2 equivalent.
Is injection-moulded vinyl better for the climate?
It can be. The Music Climate Pact notes that injection moulding can emit less than traditional pressing when it runs on low-carbon electricity.
Where can I download the Vinyl Alliance report?
From the Vinyl Alliance's resources page, free of charge. The link is in the report box above.
Planning a release? Tell us the format, quantity and finish in our configurator and we will reply with a quote by email.